| Customization: | Available |
|---|---|
| Condition: | New |
| Rotation Speed: | 35r/Min |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ID-Mounted Pneumatic Pipe Beveller
The ID-Mounted Pneumatic Pipe Beveller operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
Features:
| Model | Working Range(ID-OD) | Wall Thickness(mm) | Rotation Speed(r/min) | |
| ISP-30 | Φ18-30 | 1/2"-3/4" | ≤15 | 60 |
| ISP-80 | Φ28-89 | 1"-3" | ≤15 | 55 |
| ISP-120 | Φ40-120 | 11/4"-4" | ≤15 | 38 |
| ISP-159 | Φ65-159 | 21/2"-5' | ≤20 | 35 |
| ISP-252-1 | Φ80-273 | 3"-10" | ≤20 | 16 |
| ISP-252-2 | Φ80-273 | ≤75 | 16 | |
| ISP-352-1 | Φ150-356 | 6"-14" | ≤20 | 14 |
| ISP-352-2 | Φ150-356 | ≤75 | 14 | |
| ISP-426-1 | Φ273-426 | 10"-16" | ≤20 | 12 |
| ISP-426-2 | Φ273-426 | ≤75 | 12 | |
| ISP-630-1 | Φ300-630 | 12"-24" | ≤20 | 10 |
| ISP-630-2 | Φ300-630 | ≤75 | 10 | |
| ISP-850-1 | Φ490-850 | 24"-34" | ≤20 | 9 |
| ISP-850-2 | Φ490-850 | ≤75 | 9 | |
){kind=link}